Can you produce cabinets exactly to our drawings?
Yes. Drawings and BOMs provided by the buyer are used as the primary reference. Clarifications and feasibility questions are raised before quotation.
OEM & Custom Electrical
OEM & Custom Electrical Projects: Cabinets, Panels & Enclosures Developed from Buyer Drawings
OEM, panel builder and project developer buyers often require electrical cabinets, enclosures and control panels developed directly against their own drawings, BOMs and technical specifications — outside standard catalogue offerings. Anchor Matrix Global coordinates these custom electrical projects with selected manufacturing partners based on technical capability, capacity and project requirements.
Positioning
Where AMG Fits In
For oem & custom electrical projects, AMG acts as a coordination layer between the overseas buyer and selected Chinese manufacturing partners. Project specifications, applicable standards, preferred components and documentation requirements are reviewed before a quotation request is forwarded. Final capability, configuration and delivery terms are confirmed per project.
Solutions
Typical Equipment Categories for This Industry
Categories below represent the typical equipment mix for oem & custom electrical projects projects. Specific configurations are confirmed per project with the selected manufacturing partner.
Custom Electrical Cabinets & Enclosures
Cabinets and enclosures developed from buyer drawings and specifications.
Electrical Control Cabinets
Control cabinets assembled per project wiring and component list.
Distribution Cabinets
Distribution cabinets developed against project dimensions and component preferences.
PLC & Automation Control Systems
Automation panels integrated with PLC, HMI and drive components.
Low Voltage Switchgear
Project-specific LV switchgear configurations for OEM requirements.
Outdoor Electrical Cabinets
Outdoor cabinets with IP and finish specified per project.
Cable Tray Systems
Cable trays and ladders cut to project dimensions and finishes.
Busbar Systems
Busbar layouts developed against project current rating and dimensional constraints.
For a complete view of all sourcing categories and detailed per-category information, see the full products catalogue →
Applications
Typical Project Applications
Common project types where oem & custom electrical projects requirements are encountered. Each project is evaluated against its specific scope.
OEM Panel Builders
OEMs and panel builders sourcing finished cabinets and enclosures under their own brand.
Industrial OEMs
Industrial OEMs requiring project-specific control and distribution cabinets.
Switchgear OEMs
Switchgear manufacturers requiring sub-assemblies or complete switchgear to spec.
EV / Battery OEMs
EV and battery OEMs requiring project-specific power and control cabinets.
HVAC / Refrigeration OEMs
OEMs requiring control cabinets integrated with their equipment.
Pump / Motor OEMs
Pump and motor OEMs requiring motor control centers and auxiliary cabinets.
Automation System Integrators
System integrators requiring control panels matching project I/O lists.
Tier-1 / Tier-2 Suppliers
Suppliers coordinating sub-assemblies to support larger project programs.
RFQ Preparation
Information That Helps Quotation
The more project information is shared upfront, the faster technical review and quotation can be coordinated.
01CAD drawings (DXF, DWG or PDF) and panel layout
02Electrical schematics (SLD, control schematic)
03BOM with approved components and quantities
04Cabinet dimensions, material and finish requirements
05IP rating and installation environment
06Voltage, current and short-circuit rating
07Labeling, nameplate and documentation language
08Testing requirements (FAT, type test, routine test)
09Packaging, marking and shipping requirements
10Target cost, quantity and delivery schedule
Don't have a complete specification?
Send us the information currently available. We can coordinate with suitable manufacturing partners to identify the additional technical information required for a oem & custom electrical projects quotation.
Process
How Custom Electrical Projects Are Coordinated
A six-step approach adapted from buyer drawings through serial production.
Buyer Drawings & BOM
Buyer provides CAD drawings, schematics, BOM and any project-specific requirements.
Technical Review
AMG reviews the drawings, BOM and standards; identifies clarifications or feasibility questions.
Manufacturing Match
A suitable Chinese manufacturing partner is selected based on capability, capacity and project fit.
Quotation
Manufacturing partner submits a quotation based on confirmed drawings and components.
Sample / Prototype
Where required, a sample or prototype build is coordinated for buyer approval before serial production.
Serial Production & Delivery
After approval, serial production, quality checks and international delivery are coordinated per the project's timeline.
Why AMG
Why Coordinate OEM & Custom Electrical Projects Projects Through Anchor Matrix Global?
Industry-Aware Coordination
We organise specifications, drawings and component preferences around the typical structure of each industry — distribution, control, automation or outdoor power.
Multi-Category Capability
Most industry projects combine several equipment categories. AMG can coordinate sourcing across suitable manufacturing partners for the same project.
Technical Requirement Review
Drawings, BOMs and standards are reviewed against project requirements before a quotation request is forwarded.
Configuration Matching
Project-specific configurations (dimensions, components, IP rating, documentation language) are evaluated per inquiry.
International Procurement Coordination
Communication, export-related documentation and delivery arrangements are organised between the overseas buyer and the selected manufacturing partner.
FAQ
OEM & Custom Electrical Projects Procurement FAQ
How do you handle component sourcing?
Components specified by the buyer are sourced as part of the BOM. Where alternatives are needed, proposals are submitted for buyer approval.
Are confidential drawings and BOMs protected?
Confidentiality and NDA arrangements can be put in place before drawings are shared with manufacturing partners.
Can prototype or pre-production quantities be supported?
Prototype and pre-production quantities can be evaluated. Minimum order quantities depend on the selected manufacturing partner.
Can FAT (Factory Acceptance Testing) be arranged?
FAT can be coordinated based on project requirements and buyer attendance.
What about long-term serial supply?
Long-term supply agreements can be coordinated subject to project structure and the selected partner's capability.
Request a Quote
Request a OEM & Custom Electrical Projects Project Quotation
Send your project requirements, drawings or specifications. Anchor Matrix Global will review the request and coordinate with suitable manufacturing resources for technical confirmation and quotation.
Related Industries
Other Industries AMG Coordinates
OEM & Custom Electrical Projects projects often involve equipment categories also used in adjacent industries. AMG can coordinate multi-industry requirements within the same project.
Industrial Facilities
Power distribution and motor control for plants, factories and warehouses.
Commercial Buildings
Main, sub and downstream distribution for office, retail and mixed-use buildings.
Infrastructure Projects
MV / LV supply, substations and cable management for large-scale public infrastructure.
Water & Environmental Systems
Automation, control and outdoor power for water treatment, pumping and environmental facilities.
Renewable Energy & Energy Systems
MV / LV supply, protection and substations for solar, wind and energy storage projects.
Related Products
Relevant Product Categories
Primary product categories typically applied to oem & custom electrical projects projects. Detailed per-category information is available on each product page.
Custom Electrical Cabinets & Enclosures
Custom electrical cabinets developed from buyer drawings, BOMs and technical specifications.
Electrical Control Cabinets
Industrial control cabinets integrating PLC, VFD, motor control and automation components.
Distribution Boards & Cabinets
Distribution boards, sub-distribution and downstream power distribution equipment.
PLC & Automation Control Systems
PLC control, HMI integration and automation solutions for industrial projects.
Low Voltage Switchgear
Power distribution switchgear for industrial, commercial and infrastructure projects.
Outdoor Electrical Cabinets
Outdoor electrical cabinets and enclosures designed for environmental conditions.
For the complete view of all categories, see the full products catalogue →